|
|
|
Massive data requires massive storage - the JetStor SATA Model 642F. Featuring dual-redundant active/active array controllers, this 42 bay RAID array delivers reliable data protection combined with the high performance of 4Gbit Fiber Channel host interfaces and quad 3Gbit SAS disk channel expanders to handle astounding amounts of data. Engineered to meet stringent demands for continuous availability, JetStor SATA 642F RAID array spotlights a brand-new 128-bit AMCC RISC processor for blazingly fast parity calculation and I/O operations, completely cableless SAS backplane-based design with SES capabilities, and storage capacities reaching 84TB in one compact 4U enclosure.
Low service and integration costs are assured by the JetStor's cableless design, three redundant hot-swappable power supplies with three independent power inputs, turbo cooling fans, and dual embedded RAID controllers. Three year warranty comes standard with every array and covers all components.
JetStor SATA 642F RAID addresses many challenges present in datacenters and delivers unparalleled storage flexibility, higher levels of data availability, management and configuration simplicity, all while securing maximum investment protection to support future growth.
|
|
|
|
|
|
SATA drive capacities of 1TB (7,200 rpm) and 2TB (7,200 rpm) are available.
Per enclosure maximum capacity of 84TB when using 2TB SATA drives.
Scaleable to over a hundred TB using additional expansion chassis.
|
|
|
|
|
|
RAID Architecture
|
|
128-bit RISC 533MHz AMCC 440SPe CPU
Up to 1200 Mbytes/sec internal bandwidth
PCIe bus architecture
|
|
Host Bus Interface
|
|
Two, 4Gbit Fiber Channel, optical LC connectors per controller
Dual loop, point-to-point, and fabric supported
|
|
Disk Bus Interface
|
|
Forty two 3Gbit SATA
|
|
Command Queuing
|
|
512 commands (host FC channels)
|
|
Cache
|
|
Up to 2GB per controller
667MHz DDR II ECC cache memory
|
|
Operating Systems Supported
|
|
Windows Server 2008, Windows Server 2003, Sun/Solaris, Linux, Mac OS X, and others to be announced
|
|
Temperature
|
|
50°F to 104°F operating, -40°F to +140°F non-operating 10°C to 40°C operating, -40°C to +60°C non-operating
|
|
Relative Humidity
|
|
10% to 85% non-condensing (operating), 5% to 90% non-condensing (non-operating)
|
|
Certifications
|
|
FCC, CE, TUV, and UL/CSA
|
|
Size/Weight
|
|
19" wide, 29" deep, 7" (4U) high; 104 lb. / 48 kg. (without disk drives)
|
|
I/O Connectors (per controller)
|
|
Two optical LC fiber channel; RS-232 serial terminal port, UPS port
RJ45 Ethernet management port
SAS Expansion port
|
|
Power Required
|
|
110 or 220 VAC, ±20% @ 10 amps / 5 amps peak; 47 to 63 Hz. autosensing
Three independent power inputs
|
|
|
|
|
|
|
|
|
|
|
|
|
Data Archival
Disk-to-Disk Backup
Backup Staging
|
|
|
|
|
|
Exclusive RAID Manager configuration, monitoring, and notification software provides instant access to the status of the RAID Array and allows for 24x7 RAID monitoring and notification.
Dual FC host connection can support multiple hosts simultaneously. Perfect for clustered environments, e.g. MSCS - Microsoft Cluster Server.
Up to forty two low-profile SATA disk drives per enclosure.
Automatic drive failure detection with pre-emptive drive cloning on demand.
RAID controller provides RAID 0, 10, 1, 5, and 6, Global Hot Spare Disk, Auto Rebuild, and up to 2GB of mirrored data cache.
Optional 72 hours battery backup for mirrored data cache.
Intelligent SATA backplane design allows "hot swapping" of disk canisters, power supplies, and fans for increased reliability, lower cost, and ease of maintenance.
Lightweight aluminum chassis design.
Environmental Monitor module allows observation of critical operating parameters via the front LCD panel.
In-band SES (SCSI Enclosure Services) monitoring via SAS.
MPIO-based active/active dual redundant controller operation.
|
|
|
|
|
|
AC&NC - Related Products
 JetStor SAS 616F
JetStor SATA 516F
JetStor SAS 516F
JetStor SAS 642F
JetStor SAS 624F
|
|
|
|
|
